Catch
Hemmed, sloped stainless sections collect fluid beneath vulnerable joints.
FlowGuard™ / Liquid cooling
Put water overhead.
Not risk.
Modular stainless-steel containment beneath liquid-cooling pipework—designed to catch leaks, host sensing cable and route fluid away from critical equipment.
SECONDARY COOLING LOOP
LEAK SENSING CABLE
PROJECT WIDTH
01 Sloped stainless bed
02 Drain connection
GRAVITY FALL →
304 / 316stainless options
1.0 / 1.2metre modules
3layers: catch · detect · drain
100%project-configurable
01 / The protection layer
Cooling liquid belongs
inside the loop.
Every valve, coupling and flexible connection above the white space creates a location that deserves engineered protection.
FlowGuard forms a continuous, inspectable route beneath those connections. It integrates containment, sensing support and controlled drainage in one modular assembly.
Detect
Dedicated clips hold sensing cable at the tray’s low point for rapid notification.
Drain
End dams and drain bosses route captured liquid toward the agreed safe location.
02 / Modular by design
Overlapping sections
Standard-length modules simplify transport, installation and future extension.
Sensor-ready channel
Purpose-made supports keep leak-detection cable correctly positioned and serviceable.
Controlled outlet
Project-selected drain size, location and fall—without improvised site modifications.
03 / Where it works
One system.
Four risk zones.
Configure around the cooling architecture, access strategy and maintenance plan.
- 01Overhead branch pipework
- 02Valve and hose connections
- 03CDU service zones
- 04Rack manifolds and rear-door coolers
04 / Base specification
Protection shaped
to the pipe route.
Final material, support, drainage and sensor requirements are coordinated with the project engineer.
- Material
- 1.0–1.5 mm 304 stainless; 316 option
- Module length
- Typical 1,000 or 1,200 mm sections
- Jointing
- Overlapping, gasketed or project-specified joints
- Drainage
- Sloped bed, end dams and configurable drain boss
- Detection
- Clips or channel for project-selected sensing cable
- Mounting
- Adjustable trapeze, threaded rod or bespoke support frame
Engineering note FlowGuard is a fabricated containment component. Support loads, drainage capacity, sensor selection and final arrangement remain subject to project engineering and site approval.
05 / Start a project
Map the pipe route.
Build in protection.
Use the form to create a ready-to-send project brief. Add pipework drawings and drainage requirements when your sales contact is connected.